Our Catford supply and fit service
For landlords, managing agents, businesses and homeowners in Catford, we provide FD90 and FD120 steel doorsets for plant and high-risk rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Catford is about 6 miles from London; we cover both, along with Blackheath, Greenwich and Beckenham.
Regulations for FD90 and FD120 fire doors in Greater London
New and replacement fire doors in Catford are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Catford
Guide prices for FD90 and FD120 fire doors in Catford run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD90 and FD120 fire doors are needed
High fire-load stores and separating walls with long ratings are among the most common settings for FD90 and FD120 fire doors, in Catford as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- High fire-load stores
- Separating walls with long ratings
- Transformer and switch rooms
- Generator rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Greater London
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Catford.
Is the survey in Catford free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you work for landlords and managing agents in Catford?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Also covering towns near Catford
- Blackheath (2 miles)
- Greenwich (2 miles)
- Beckenham (2 miles)
- Peckham (3 miles)
- Eltham (3 miles)
- Brixton (4 miles)
Also available in Catford
- Fire-Rated Screens & Fanlights in Catford
- Fire Doors for Homes in Catford
- FD60 Fire Doorsets in Catford
- FD30S Smoke Control Doorsets in Catford
- School & Healthcare Fire Doors in Catford
- Timber Fire Doorsets in Catford
- HMO Fire Doors in Catford
- Fire Door Supply & Fit in Catford
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Catford