FD30 Fire Doorsets for Barnes buildings
Getting FD30 fire doors right in Barnes means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover SW13 and the surrounding area, including Chiswick. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Barnes
Because Barnes is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD30 fire doors in Greater London
Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Barnes are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD30 fire doors
Typical uses for FD30 fire doors in Barnes include HMO bedrooms and kitchens and offices and retail back-of-house.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- HMO bedrooms and kitchens
- Offices and retail back-of-house
- Plant rooms and stores
- Hotel corridors
What you get with each doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Barnes property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Greater London
Which rules do FD30 fire doors in Barnes need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you work for landlords and managing agents in Barnes?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you fit just one door in Barnes?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Nearby towns we cover
- Chiswick (1 mile)
- Putney (2 miles)
- Fulham (2 miles)
- Shepherd's Bush (2 miles)
- Richmond (2 miles)
- Acton (2 miles)
Other products in Barnes
- Stairwell & Escape Route Doors in Barnes
- Composite Fire Doors in Barnes
- HMO Fire Doors in Barnes
- Acoustic Fire Doors in Barnes
- FD60 Fire Doorsets in Barnes
- Riser & Service Cupboard Doors in Barnes
- Timber Fire Doorsets in Barnes
- Steel Fire Doors in Barnes
- FD30 Fire Doorsets across Greater London
- All fire doors in Barnes