Certified fire door closers and ironmongery for Barnes
Looking for fire door closers and ironmongery in Barnes? Our supply and fit service covers SW13 and the surrounding area, including Chiswick and Putney. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Our Greater London coverage includes Barnes and its neighbours Chiswick, Putney and Fulham; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Barnes?
New and replacement fire doors in Barnes are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Barnes
Budget around £120 to £500 per item for fire door closers and ironmongery supplied and fitted in Barnes, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need fire door closers and ironmongery
Typical uses for fire door closers and ironmongery in Barnes include failed closers and hinges and seal and signage replacement.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Failed closers and hinges
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about fire door closers and ironmongery in Barnes
Is the survey in Barnes free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Barnes.
Can you fit just one door in Barnes?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Fire Door Ironmongery & Closers near Barnes
- Chiswick (1 mile)
- Putney (2 miles)
- Fulham (2 miles)
- Shepherd's Bush (2 miles)
- Richmond (2 miles)
- Acton (2 miles)
Other products in Barnes
- School & Healthcare Fire Doors in Barnes
- Riser & Service Cupboard Doors in Barnes
- Fire Exit Doors in Barnes
- FD30 Fire Doorsets in Barnes
- Fire Doors for Homes in Barnes
- Communal & Corridor Fire Doors in Barnes
- Timber Fire Doorsets in Barnes
- Glazed Fire Doors in Barnes
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Barnes