Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Ayrshire

We supply and fit FD60 fire doors throughout Ayrshire, including Kilmarnock, Ayr and Irvine, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in Ayrshire, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 fire doors in Ayrshire: how we work

We supply and fit FD60 fire doors across Ayrshire, including Kilmarnock, Ayr and Irvine. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Fire door rules in Ayrshire

Fire doors in Ayrshire follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.

Guide prices in Ayrshire

Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Ayrshire quote is fixed after survey and itemised door by door.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Where FD60 fire doors are needed

Ayrshire's towns combine traditional housing and council estates with schools, hotels and industrial estates.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

Doorset specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

What happens next

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

FD60 fire doors in Ayrshire: questions

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Is there an FD60S?

Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.

Towns in Ayrshire we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in Ayrshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.