FD30 fire doors in Ayrshire: how we work
Throughout Ayrshire, including Kilmarnock, Ayr and Irvine, we survey, quote and fit FD30 doorsets for flats, offices, HMOs and corridors as complete certified doorsets, with the manufacturer's certificate reference on every quote.
Regulations for FD30 fire doors in Ayrshire
Scotland has its own system: new and replacement fire doors in Ayrshire are designed to the Building (Scotland) Regulations 2004 and the Technical Handbooks (Section 2, Fire). For non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on whoever controls the building.
Guide prices in Ayrshire
Budget around £750 to £1,150 per single doorset for FD30 fire doors supplied and fitted in Ayrshire, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD30 fire doors
Ayrshire's towns combine traditional housing and council estates with schools, hotels and industrial estates.
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Hotel corridors
- Plant rooms and stores
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
How it works in Ayrshire
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD30 fire doors in Ayrshire
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
Will I get certificates for the doors fitted?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Towns in Ayrshire we cover for FD30 fire doors
FD30 Fire Doorsets in neighbouring areas
- Renfrewshire & Inverclyde
- Glasgow & Dunbartonshire
- Lanarkshire
- Forth Valley
- Argyll & Bute
- Dumfries & Galloway
Other fire doors in Ayrshire
- FD30S Smoke Control Doorsets in Ayrshire
- FD60 Fire Doorsets in Ayrshire
- FD90 & FD120 Doorsets in Ayrshire
- Flat Entrance Fire Doors in Ayrshire
- Communal & Corridor Fire Doors in Ayrshire
- Stairwell & Escape Route Doors in Ayrshire
- HMO Fire Doors in Ayrshire
- Fire Doors for Homes in Ayrshire
- Riser & Service Cupboard Doors in Ayrshire
- Commercial & Office Fire Doors in Ayrshire
- School & Healthcare Fire Doors in Ayrshire
- Timber Fire Doorsets in Ayrshire
- Composite Fire Doors in Ayrshire
- Steel Fire Doors in Ayrshire
- Glazed Fire Doors in Ayrshire
- Double & Leaf-and-a-Half Fire Doors in Ayrshire
- Fire-Rated Screens & Fanlights in Ayrshire
- Acoustic Fire Doors in Ayrshire
- Security Fire Doors in Ayrshire
- Fire Exit Doors in Ayrshire
- Fire Door Ironmongery & Closers in Ayrshire
- Fire Door Replacement in Ayrshire
- Fire Door Supply & Fit in Ayrshire
- All fire doors in Ayrshire