Certified FD30S fire doors for Stroud
Fire Rated Doors supplies and fits FD30S fire doors in Stroud, Gloucestershire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover GL6 and the surrounding area, including Gloucester. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Stroud
New and replacement fire doors in Stroud are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD30S fire doors cost in Stroud?
Our guide price for FD30S fire doors in Stroud is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD30S fire doors are used in Stroud
Wherever they are in Stroud, FD30S fire doors are most often specified for protected stairways and lobby doors in blocks of flats.
Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.
- Protected stairways
- Lobby doors in blocks of flats
- Integral garage doors
- Cross-corridor doors
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Gloucestershire
Do you cover Stroud?
Yes. We survey, supply and fit FD30S fire doors throughout Stroud and the rest of Gloucestershire, including GL6 and nearby Gloucester.
Can you fit just one door in Stroud?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Gloucestershire.
What does a Stroud quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
Neighbouring areas
- Gloucester (8 miles)
- Cirencester (10 miles)
- Cheltenham (12 miles)
- Tewkesbury (17 miles)
- Yate (17 miles)
- Chippenham (20 miles)
Other fire doors in Stroud
- Communal & Corridor Fire Doors in Stroud
- Fire Exit Doors in Stroud
- School & Healthcare Fire Doors in Stroud
- Acoustic Fire Doors in Stroud
- Steel Fire Doors in Stroud
- Fire Door Supply & Fit in Stroud
- Stairwell & Escape Route Doors in Stroud
- Fire-Rated Screens & Fanlights in Stroud
- FD30S Smoke Control Doorsets across Gloucestershire
- All fire doors in Stroud