Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Cheltenham

We supply and fit FD30S fire doors in Cheltenham (GL50) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £800 per single doorset in Cheltenham, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Certified FD30S fire doors for Cheltenham

Getting FD30S fire doors right in Cheltenham means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

We cover GL50 and the surrounding area, including Tewkesbury. Tell us your postcode and preferred dates and we'll confirm a survey slot.

Regulations for FD30S fire doors in Gloucestershire

In Cheltenham, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Guide prices in Cheltenham

Guide prices for FD30S fire doors in Cheltenham run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Buildings that need FD30S fire doors

Wherever they are in Cheltenham, FD30S fire doors are most often specified for protected stairways and cross-corridor doors.

Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.

  • Protected stairways
  • Cross-corridor doors
  • Lobby doors in blocks of flats
  • Integral garage doors

What's in the doorset

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

What happens next

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

FD30S fire doors in Cheltenham: questions

Is the survey in Cheltenham free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Will I get certificates for the doors fitted in Cheltenham?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Which rules do FD30S fire doors in Cheltenham need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Is a threshold seal needed?

It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.

Nearby towns we cover

More doorsets for Cheltenham

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.