Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Wiltshire

We supply and fit FD30S fire doors throughout Wiltshire, including Swindon, Salisbury and Trowbridge, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £800 per single doorset in Wiltshire, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

FD30S Smoke Control Doorsets for Wiltshire buildings

Our Wiltshire service covers FD30S fire doors for flats, HMOs, workplaces, schools and homes, including Swindon, Salisbury and Trowbridge.

Which rules apply in Wiltshire?

Because Wiltshire is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Cost of FD30S fire doors in Wiltshire

Our guide price for FD30S fire doors in Wiltshire is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Buildings that need FD30S fire doors

Wiltshire is anchored by Swindon's offices and warehouses, with Salisbury, Trowbridge and Chippenham adding period conversions and schools.

  • Protected stairways
  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats

Doorset specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

How it works in Wiltshire

  1. Tell us about the doors — photos help
  2. Free measure survey at your Wiltshire property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Questions about FD30S fire doors in Wiltshire

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do smoke seals stop the door closing?

They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.

Towns in Wiltshire we cover for FD30S fire doors

FD30S Smoke Control Doorsets in neighbouring areas

Other fire doors in Wiltshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.