Certified fire door closers and ironmongery for Newcastle-under-Lyme
We fit fire door closers, hinges and hold-open devices in Newcastle-under-Lyme and the rest of Staffordshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Our Staffordshire coverage includes Newcastle-under-Lyme and its neighbours Stoke-on-Trent, Longton and Kidsgrove; tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Newcastle-under-Lyme
In Newcastle-under-Lyme, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Fire door closers and ironmongery prices in Newcastle-under-Lyme
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Newcastle-under-Lyme quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where fire door closers and ironmongery are used in Newcastle-under-Lyme
Wherever they are in Newcastle-under-Lyme, fire door closers and ironmongery are most often specified for busy corridors needing hold-open and failed closers and hinges.
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- Busy corridors needing hold-open
- Failed closers and hinges
- Access control preparation
- Seal and signage replacement
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Fire door closers and ironmongery in Newcastle-under-Lyme: questions
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Newcastle-under-Lyme.
Which rules do fire door closers and ironmongery in Newcastle-under-Lyme need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Newcastle-under-Lyme quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Neighbouring areas
- Stoke-on-Trent (2 miles)
- Longton (4 miles)
- Kidsgrove (6 miles)
- Crewe (11 miles)
- Congleton (11 miles)
- Stafford (14 miles)
Also available in Newcastle-under-Lyme
- FD60 Fire Doorsets in Newcastle-under-Lyme
- Flat Entrance Fire Doors in Newcastle-under-Lyme
- Fire Door Supply & Fit in Newcastle-under-Lyme
- FD30S Smoke Control Doorsets in Newcastle-under-Lyme
- School & Healthcare Fire Doors in Newcastle-under-Lyme
- Riser & Service Cupboard Doors in Newcastle-under-Lyme
- FD90 & FD120 Doorsets in Newcastle-under-Lyme
- HMO Fire Doors in Newcastle-under-Lyme
- Fire Door Ironmongery & Closers across Staffordshire
- All fire doors in Newcastle-under-Lyme