FD30 Fire Doorsets for Crewe buildings
Looking for FD30 fire doors in Crewe? Our supply and fit service covers CW1 and the surrounding area, including Winsford and Kidsgrove. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Where possible we combine Crewe surveys with other visits in Cheshire, such as Winsford and Kidsgrove, which helps keep survey dates flexible.
Regulations for FD30 fire doors in Cheshire
Fire doors in Crewe sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Crewe
Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Crewe quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30 fire doors are used in Crewe
Wherever they are in Crewe, FD30 fire doors are most often specified for HMO bedrooms and kitchens and plant rooms and stores.
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- HMO bedrooms and kitchens
- Plant rooms and stores
- Offices and retail back-of-house
- Hotel corridors
FD30 Fire Doorsets: key specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Crewe property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Cheshire
Which rules do FD30 fire doors in Crewe need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Crewe quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Crewe free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Does an FD30 door need a self-closer?
Almost always. Fire doors only work closed, so they need a self-closing device unless they are cupboard or riser doors kept locked shut.
Also covering towns near Crewe
- Winsford (7 miles)
- Kidsgrove (9 miles)
- Congleton (11 miles)
- Newcastle-under-Lyme (11 miles)
- Northwich (12 miles)
- Stoke-on-Trent (12 miles)
Other products in Crewe
- Fire Door Replacement in Crewe
- Acoustic Fire Doors in Crewe
- Commercial & Office Fire Doors in Crewe
- FD90 & FD120 Doorsets in Crewe
- Double & Leaf-and-a-Half Fire Doors in Crewe
- Composite Fire Doors in Crewe
- Fire Doors for Homes in Crewe
- FD60 Fire Doorsets in Crewe
- FD30 Fire Doorsets across Cheshire
- All fire doors in Crewe