Fire Door Ironmongery & Closers for Hartlepool buildings
We fit fire door closers, hinges and hold-open devices in Hartlepool and the rest of County Durham. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover TS26 and the surrounding area, including Peterlee. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Hartlepool
New and replacement fire doors in Hartlepool are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of fire door closers and ironmongery in County Durham
Our guide price for fire door closers and ironmongery in Hartlepool is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need fire door closers and ironmongery
Typical uses for fire door closers and ironmongery in Hartlepool include failed closers and hinges and busy corridors needing hold-open.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Failed closers and hinges
- Busy corridors needing hold-open
- Seal and signage replacement
- Access control preparation
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Fire door closers and ironmongery in Hartlepool: questions
What does a Hartlepool quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do fire door closers and ironmongery in Hartlepool need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Hartlepool.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Also covering towns near Hartlepool
- Peterlee (7 miles)
- Billingham (7 miles)
- Middlesbrough (7 miles)
- Redcar (7 miles)
- Stockton-on-Tees (9 miles)
- Thornaby-on-Tees (11 miles)
Other fire doors in Hartlepool
- Fire Door Replacement in Hartlepool
- Timber Fire Doorsets in Hartlepool
- FD30 Fire Doorsets in Hartlepool
- Composite Fire Doors in Hartlepool
- FD90 & FD120 Doorsets in Hartlepool
- Acoustic Fire Doors in Hartlepool
- Double & Leaf-and-a-Half Fire Doors in Hartlepool
- FD60 Fire Doorsets in Hartlepool
- Fire Door Ironmongery & Closers across County Durham
- All fire doors in Hartlepool