Our Billingham supply and fit service
Getting fire door closers and ironmongery right in Billingham means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Whether your building is in central Billingham or on its edges towards Stockton-on-Tees, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
What the law says in Billingham
Fire doors in Billingham sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Fire door closers and ironmongery prices in Billingham
Our guide price for fire door closers and ironmongery in Billingham is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need fire door closers and ironmongery
Typical uses for fire door closers and ironmongery in Billingham include seal and signage replacement and failed closers and hinges.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Seal and signage replacement
- Failed closers and hinges
- Busy corridors needing hold-open
- Access control preparation
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in County Durham
What does a Billingham quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Billingham?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you fit just one door in Billingham?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in County Durham.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Nearby towns we cover
- Stockton-on-Tees (2 miles)
- Middlesbrough (2 miles)
- Thornaby-on-Tees (4 miles)
- Hartlepool (7 miles)
- Redcar (9 miles)
- Darlington (11 miles)
Other fire doors in Billingham
- FD30 Fire Doorsets in Billingham
- Fire Doors for Homes in Billingham
- Glazed Fire Doors in Billingham
- Composite Fire Doors in Billingham
- Commercial & Office Fire Doors in Billingham
- Timber Fire Doorsets in Billingham
- FD30S Smoke Control Doorsets in Billingham
- Communal & Corridor Fire Doors in Billingham
- Fire Door Ironmongery & Closers across County Durham
- All fire doors in Billingham