Fire Door Ironmongery & Closers for Chelsea buildings
Fire Rated Doors supplies and fits fire door closers and ironmongery in Chelsea, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Whether your building is in central Chelsea or on its edges towards Battersea, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Regulations for fire door closers and ironmongery in Greater London
In Chelsea, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of fire door closers and ironmongery in Greater London
Our guide price for fire door closers and ironmongery in Chelsea is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where fire door closers and ironmongery are needed
Typical uses for fire door closers and ironmongery in Chelsea include access control preparation and seal and signage replacement.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Access control preparation
- Seal and signage replacement
- Busy corridors needing hold-open
- Failed closers and hinges
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Chelsea property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Greater London
What does a Chelsea quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you work for landlords and managing agents in Chelsea?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you cover Chelsea?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Chelsea and the rest of Greater London, including SW3 and nearby Battersea.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Fire Door Ironmongery & Closers near Chelsea
- Battersea (1 mile)
- Fulham (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Notting Hill (2 miles)
- London (2 miles)
Other fire doors in Chelsea
- Steel Fire Doors in Chelsea
- Composite Fire Doors in Chelsea
- FD30S Smoke Control Doorsets in Chelsea
- HMO Fire Doors in Chelsea
- Commercial & Office Fire Doors in Chelsea
- Stairwell & Escape Route Doors in Chelsea
- Fire-Rated Screens & Fanlights in Chelsea
- FD90 & FD120 Doorsets in Chelsea
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Chelsea