Our Pimlico supply and fit service
If your fire risk assessment in Pimlico has flagged doors to replace, we can schedule, quote and fit fire door closers, hinges and hold-open devices to match its recommendations. Surveys in SW1V are free and quotes are fixed and itemised.
Where possible we combine Pimlico surveys with other visits in Greater London, such as Westminster and Battersea, which helps keep survey dates flexible.
What the law says in Pimlico
Because Pimlico is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Pimlico
Our guide price for fire door closers and ironmongery in Pimlico is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Pimlico
Typical uses for fire door closers and ironmongery in Pimlico include access control preparation and seal and signage replacement.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Access control preparation
- Seal and signage replacement
- Failed closers and hinges
- Busy corridors needing hold-open
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about fire door closers and ironmongery in Pimlico
Will I get certificates for the doors fitted in Pimlico?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do fire door closers and ironmongery in Pimlico need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Pimlico quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Neighbouring areas
- Westminster (1 mile)
- Battersea (1 mile)
- Chelsea (1 mile)
- London (1 mile)
- Brixton (2 miles)
- Fulham (2 miles)
Other products in Pimlico
- Fire-Rated Screens & Fanlights in Pimlico
- Flat Entrance Fire Doors in Pimlico
- Acoustic Fire Doors in Pimlico
- FD90 & FD120 Doorsets in Pimlico
- School & Healthcare Fire Doors in Pimlico
- Stairwell & Escape Route Doors in Pimlico
- Riser & Service Cupboard Doors in Pimlico
- Fire Doors for Homes in Pimlico
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Pimlico