Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Taunton

We supply and fit FD90 and FD120 fire doors in Taunton (TA1) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £1,900 per single doorset in Taunton, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Getting FD90 and FD120 fire doors fitted in Taunton

We cover Taunton and nearby Bridgwater for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

Taunton is about 40 miles from Bath; we cover both, along with Bridgwater, Burnham-on-Sea and Tiverton.

What the law says in Taunton

In Taunton, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do FD90 and FD120 fire doors cost in Taunton?

Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Taunton quote is fixed after survey and itemised door by door.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where FD90 and FD120 fire doors are needed

Transformer and switch rooms and separating walls with long ratings are among the most common settings for FD90 and FD120 fire doors, in Taunton as elsewhere.

Somerset includes Bath's Georgian conversions and student housing, Weston-super-Mare's hotels and Taunton and Yeovil's town centres.

  • Transformer and switch rooms
  • Separating walls with long ratings
  • Generator rooms
  • High fire-load stores

What's in the doorset

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

What happens next

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Your questions answered

Can you work around tenants or staff in Taunton?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you work for landlords and managing agents in Taunton?

Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.

What does a Taunton quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Do these doors need panic hardware?

Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.

Also covering towns near Taunton

Also available in Taunton

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.