Our Bridgwater supply and fit service
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Bridgwater, Somerset. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Whether your building is in central Bridgwater or on its edges towards Burnham-on-Sea, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Which rules apply in Bridgwater?
New and replacement fire doors in Bridgwater are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD90 and FD120 fire doors in Somerset
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Bridgwater are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD90 and FD120 fire doors are used in Bridgwater
Typical uses for FD90 and FD120 fire doors in Bridgwater include separating walls with long ratings and generator rooms.
Somerset includes Bath's Georgian conversions and student housing, Weston-super-Mare's hotels and Taunton and Yeovil's town centres.
- Separating walls with long ratings
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Somerset
Do you cover Bridgwater?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Bridgwater and the rest of Somerset, including TA6 and nearby Burnham-on-Sea.
Will I get certificates for the doors fitted in Bridgwater?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do FD90 and FD120 fire doors in Bridgwater need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Burnham-on-Sea (7 miles)
- Taunton (9 miles)
- Weston-super-Mare (15 miles)
- Yeovil (20 miles)
- Barry (22 miles)
- Clevedon (22 miles)
Other products in Bridgwater
- Fire Door Supply & Fit in Bridgwater
- Double & Leaf-and-a-Half Fire Doors in Bridgwater
- Fire-Rated Screens & Fanlights in Bridgwater
- Timber Fire Doorsets in Bridgwater
- FD30 Fire Doorsets in Bridgwater
- Glazed Fire Doors in Bridgwater
- Fire Door Ironmongery & Closers in Bridgwater
- Stairwell & Escape Route Doors in Bridgwater
- FD90 & FD120 Doorsets across Somerset
- All fire doors in Bridgwater