Our Stamford supply and fit service
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Stamford, Lincolnshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Stamford is about 40 miles from Lincoln; we cover both, along with Oakham, Peterborough and Corby.
Fire door rules in Stamford
Fire doors in Stamford sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Lincolnshire
Our guide price for FD90 and FD120 fire doors in Stamford is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Stamford, FD90 and FD120 fire doors are most often specified for high fire-load stores and transformer and switch rooms.
Lincolnshire's demand spans Lincoln's student housing and city centre, Grimsby and Scunthorpe's industry, and coastal holiday accommodation.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Stamford
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
What does a Stamford quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD90 and FD120 fire doors in Stamford need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Stamford.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Stamford
- Oakham (11 miles)
- Peterborough (11 miles)
- Corby (14 miles)
- Spalding (17 miles)
- Melton Mowbray (19 miles)
- Grantham (19 miles)
Other products in Stamford
- Fire Door Supply & Fit in Stamford
- Fire Door Replacement in Stamford
- Acoustic Fire Doors in Stamford
- Glazed Fire Doors in Stamford
- School & Healthcare Fire Doors in Stamford
- Flat Entrance Fire Doors in Stamford
- HMO Fire Doors in Stamford
- FD60 Fire Doorsets in Stamford
- FD90 & FD120 Doorsets across Lincolnshire
- All fire doors in Stamford