Certified FD60 fire doors for Stamford
If your fire risk assessment in Stamford has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in PE9 are free and quotes are fixed and itemised.
We cover PE9 and the surrounding area, including Oakham. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Stamford
New and replacement fire doors in Stamford are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Stamford
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Stamford quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Stamford
In Stamford, FD60 fire doors are typically needed in plant and boiler rooms and stair cores in taller blocks.
Lincolnshire's demand spans Lincoln's student housing and city centre, Grimsby and Scunthorpe's industry, and coastal holiday accommodation.
- Plant and boiler rooms
- Stair cores in taller blocks
- Compartment walls
- Higher-risk stores
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Stamford
Is the survey in Stamford free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Stamford?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Stamford.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Nearby towns we cover
- Oakham (11 miles)
- Peterborough (11 miles)
- Corby (14 miles)
- Spalding (17 miles)
- Melton Mowbray (19 miles)
- Grantham (19 miles)
Other fire doors in Stamford
- Fire Door Replacement in Stamford
- Glazed Fire Doors in Stamford
- Riser & Service Cupboard Doors in Stamford
- Flat Entrance Fire Doors in Stamford
- Steel Fire Doors in Stamford
- FD30S Smoke Control Doorsets in Stamford
- Communal & Corridor Fire Doors in Stamford
- Timber Fire Doorsets in Stamford
- FD60 Fire Doorsets across Lincolnshire
- All fire doors in Stamford