Getting FD90 and FD120 fire doors fitted in Stratford
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Stratford and the rest of Greater London. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover E15 and the surrounding area, including Bow. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD90 and FD120 fire doors in Greater London
Because Stratford is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD90 and FD120 fire doors prices in Stratford
Guide prices for FD90 and FD120 fire doors in Stratford run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD90 and FD120 fire doors are used in Stratford
Wherever they are in Stratford, FD90 and FD120 fire doors are most often specified for generator rooms and separating walls with long ratings.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
- High fire-load stores
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Greater London
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Stratford.
Is the survey in Stratford free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Stratford?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How long do they take to make?
Usually several weeks as they are made to order. We confirm lead time on your quote.
FD90 & FD120 Doorsets near Stratford
- Bow (1 mile)
- Canning Town (2 miles)
- Canary Wharf (2 miles)
- Leytonstone (2 miles)
- Ilford (4 miles)
- Barking (4 miles)
More doorsets for Stratford
- Fire Door Ironmongery & Closers in Stratford
- Glazed Fire Doors in Stratford
- HMO Fire Doors in Stratford
- Communal & Corridor Fire Doors in Stratford
- Acoustic Fire Doors in Stratford
- Double & Leaf-and-a-Half Fire Doors in Stratford
- Timber Fire Doorsets in Stratford
- FD60 Fire Doorsets in Stratford
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Stratford