Certified FD90 and FD120 fire doors for Canary Wharf
Getting FD90 and FD120 fire doors right in Canary Wharf means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Greater London coverage includes Canary Wharf and its neighbours Bow, Canning Town and Greenwich; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Canary Wharf
Because Canary Wharf is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Canary Wharf
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Canary Wharf quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are used in Canary Wharf
Generator rooms and high fire-load stores are among the most common settings for FD90 and FD120 fire doors, in Canary Wharf as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
- Transformer and switch rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Canary Wharf property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD90 and FD120 fire doors in Canary Wharf
Do you work for landlords and managing agents in Canary Wharf?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Canary Wharf.
Can you work around tenants or staff in Canary Wharf?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Canary Wharf
- Bow (1 mile)
- Canning Town (2 miles)
- Greenwich (2 miles)
- Stratford (2 miles)
- Peckham (3 miles)
- Blackheath (3 miles)
Other products in Canary Wharf
- FD30 Fire Doorsets in Canary Wharf
- Acoustic Fire Doors in Canary Wharf
- FD30S Smoke Control Doorsets in Canary Wharf
- Fire Door Replacement in Canary Wharf
- HMO Fire Doors in Canary Wharf
- Fire Door Ironmongery & Closers in Canary Wharf
- Composite Fire Doors in Canary Wharf
- Steel Fire Doors in Canary Wharf
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Canary Wharf