Certified FD90 and FD120 fire doors for Canning Town
Looking for FD90 and FD120 fire doors in Canning Town? Our supply and fit service covers E16 and the surrounding area, including Stratford and Bow. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Our Greater London coverage includes Canning Town and its neighbours Stratford, Bow and Canary Wharf; tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Canning Town
In Canning Town, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Canning Town?
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Canning Town are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD90 and FD120 fire doors are needed
Wherever they are in Canning Town, FD90 and FD120 fire doors are most often specified for transformer and switch rooms and separating walls with long ratings.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
- High fire-load stores
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Canning Town
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Canning Town.
Can you fit just one door in Canning Town?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Will I get certificates for the doors fitted in Canning Town?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Neighbouring areas
- Stratford (2 miles)
- Bow (2 miles)
- Canary Wharf (2 miles)
- Greenwich (3 miles)
- Barking (3 miles)
- Blackheath (3 miles)
Other fire doors in Canning Town
- FD30 Fire Doorsets in Canning Town
- Steel Fire Doors in Canning Town
- Stairwell & Escape Route Doors in Canning Town
- Commercial & Office Fire Doors in Canning Town
- Fire Door Supply & Fit in Canning Town
- Fire Door Replacement in Canning Town
- Security Fire Doors in Canning Town
- Timber Fire Doorsets in Canning Town
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Canning Town