Our Barking supply and fit service
If your fire risk assessment in Barking has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in IG11 are free and quotes are fixed and itemised.
Where possible we combine Barking surveys with other visits in Greater London, such as Ilford and Becontree, which helps keep survey dates flexible.
Which rules apply in Barking?
New and replacement fire doors in Barking are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD90 and FD120 fire doors cost in Barking?
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Barking are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD90 and FD120 fire doors
Typical uses for FD90 and FD120 fire doors in Barking include separating walls with long ratings and generator rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Separating walls with long ratings
- Generator rooms
- Transformer and switch rooms
- High fire-load stores
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Barking property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD90 and FD120 fire doors in Barking: questions
What does a Barking quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Barking free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Barking?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Nearby towns we cover
- Ilford (2 miles)
- Becontree (2 miles)
- Thamesmead (2 miles)
- Canning Town (3 miles)
- Stratford (4 miles)
- Dagenham (4 miles)
More doorsets for Barking
- FD60 Fire Doorsets in Barking
- FD30S Smoke Control Doorsets in Barking
- Fire Doors for Homes in Barking
- Commercial & Office Fire Doors in Barking
- Stairwell & Escape Route Doors in Barking
- Fire Exit Doors in Barking
- Steel Fire Doors in Barking
- Fire Door Ironmongery & Closers in Barking
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Barking