Certified flat entrance fire doors for Chelsea
Looking for flat entrance fire doors in Chelsea? Our supply and fit service covers SW3 and the surrounding area, including Battersea and Fulham. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Chelsea is about 2 miles from London; we cover both, along with Battersea, Fulham and Pimlico.
Which rules apply in Chelsea?
New and replacement fire doors in Chelsea are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Flat entrance fire doors prices in Chelsea
Our guide for flat entrance fire doors is £1,250–£2,300 per door fitted, ex VAT. Quotes for Chelsea are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Chelsea
Student and build-to-rent blocks and converted buildings with shared stairs are among the most common settings for flat entrance fire doors, in Chelsea as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Student and build-to-rent blocks
- Converted buildings with shared stairs
- Supported housing
- Blocks of flats
What you get with each doorset
| Fire & smoke | FD30S / E30 Sa as standard |
|---|---|
| Security | PAS 24:2022 options; Approved Document Q requires PAS 24 or equivalent for new dwellings in England |
| Hardware | Self-closer, multipoint or nightlatch, fire-rated spyhole and letterplate where tested |
| Materials | Timber, composite or steel-faced |
| Acoustic | Acoustic-rated options for noisy corridors |
See the full specification and options for Flat Entrance Fire Doors
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Greater London
Which rules do flat entrance fire doors in Chelsea need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you cover Chelsea?
Yes. We survey, supply and fit flat entrance fire doors throughout Chelsea and the rest of Greater London, including SW3 and nearby Battersea.
Can you fit just one door in Chelsea?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Who is responsible for flat front fire doors?
Usually the freeholder or managing agent as the responsible person, but leases vary — some make the leaseholder responsible for the door. Either way, it falls within the building's fire risk assessment.
Also covering towns near Chelsea
- Battersea (1 mile)
- Fulham (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Notting Hill (2 miles)
- London (2 miles)
Other fire doors in Chelsea
- Timber Fire Doorsets in Chelsea
- FD60 Fire Doorsets in Chelsea
- FD90 & FD120 Doorsets in Chelsea
- HMO Fire Doors in Chelsea
- Riser & Service Cupboard Doors in Chelsea
- Commercial & Office Fire Doors in Chelsea
- Steel Fire Doors in Chelsea
- Fire Door Replacement in Chelsea
- Flat Entrance Fire Doors across Greater London
- All fire doors in Chelsea