FD90 & FD120 Doorsets for Blackheath buildings
Looking for FD90 and FD120 fire doors in Blackheath? Our supply and fit service covers SE3 and the surrounding area, including Greenwich and Catford. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Blackheath is about 6 miles from London. Wherever your building is in SE3, we arrange survey and fitting dates around access and occupancy.
What the law says in Blackheath
Because Blackheath is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD90 and FD120 fire doors cost in Blackheath?
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Blackheath are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are needed
Transformer and switch rooms and high fire-load stores are among the most common settings for FD90 and FD120 fire doors, in Blackheath as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Transformer and switch rooms
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Blackheath property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD90 and FD120 fire doors in Blackheath
Which rules do FD90 and FD120 fire doors in Blackheath need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Blackheath?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How quickly can you survey in Blackheath?
We arrange surveys around your access needs and, where possible, combine Blackheath visits with other work in Greater London. Tell us your preferred dates when you enquire.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Also covering towns near Blackheath
- Greenwich (1 mile)
- Catford (2 miles)
- Eltham (2 miles)
- Canary Wharf (3 miles)
- Peckham (3 miles)
- Canning Town (3 miles)
Other fire doors in Blackheath
- HMO Fire Doors in Blackheath
- Fire Door Supply & Fit in Blackheath
- Fire Exit Doors in Blackheath
- Security Fire Doors in Blackheath
- Communal & Corridor Fire Doors in Blackheath
- Timber Fire Doorsets in Blackheath
- Stairwell & Escape Route Doors in Blackheath
- Double & Leaf-and-a-Half Fire Doors in Blackheath
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Blackheath