Certified FD30S fire doors for Catford
Getting FD30S fire doors right in Catford means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Greater London coverage includes Catford and its neighbours Blackheath, Greenwich and Beckenham; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Catford?
In Catford, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Catford
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Catford are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Catford
In Catford, FD30S fire doors are typically needed in integral garage doors and protected stairways.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Integral garage doors
- Protected stairways
- Cross-corridor doors
- Lobby doors in blocks of flats
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD30S fire doors in Catford
Is the survey in Catford free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Catford?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which rules do FD30S fire doors in Catford need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
FD30S Smoke Control Doorsets near Catford
- Blackheath (2 miles)
- Greenwich (2 miles)
- Beckenham (2 miles)
- Peckham (3 miles)
- Eltham (3 miles)
- Brixton (4 miles)
More doorsets for Catford
- Acoustic Fire Doors in Catford
- Commercial & Office Fire Doors in Catford
- Steel Fire Doors in Catford
- Communal & Corridor Fire Doors in Catford
- Fire-Rated Screens & Fanlights in Catford
- Fire Exit Doors in Catford
- FD30 Fire Doorsets in Catford
- Fire Door Supply & Fit in Catford
- FD30S Smoke Control Doorsets across Greater London
- All fire doors in Catford