FD90 and FD120 fire doors in Hull: how we work
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Hull, East Riding of Yorkshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover Hull and the rest of East Riding of Yorkshire, with surveys arranged around your building's access and occupancy.
What the law says in Hull
New and replacement fire doors in Hull are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD90 and FD120 fire doors in East Riding of Yorkshire
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Hull quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD90 and FD120 fire doors
High fire-load stores and generator rooms are among the most common settings for FD90 and FD120 fire doors, in Hull as elsewhere.
Hull's port, industrial units and terraced housing sit alongside market towns such as Beverley and coastal resorts like Bridlington.
- High fire-load stores
- Generator rooms
- Transformer and switch rooms
- Separating walls with long ratings
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in East Riding of Yorkshire
Will I get certificates for the doors fitted in Hull?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff in Hull?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you cover Hull?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Hull and the rest of East Riding of Yorkshire, including HU1 and nearby Beverley.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
FD90 & FD120 Doorsets near Hull
- Beverley (8 miles)
- Grimsby (16 miles)
- Scunthorpe (17 miles)
- Cleethorpes (18 miles)
- Goole (22 miles)
- Bridlington (24 miles)
Other products in Hull
- Double & Leaf-and-a-Half Fire Doors in Hull
- FD30 Fire Doorsets in Hull
- Timber Fire Doorsets in Hull
- Fire-Rated Screens & Fanlights in Hull
- FD60 Fire Doorsets in Hull
- Glazed Fire Doors in Hull
- Flat Entrance Fire Doors in Hull
- Security Fire Doors in Hull
- FD90 & FD120 Doorsets across East Riding of Yorkshire
- All fire doors in Hull