Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Thornaby-on-Tees

We supply and fit FD90 and FD120 fire doors in Thornaby-on-Tees (TS17) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,900 per single doorset in Thornaby-on-Tees, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Our Thornaby-on-Tees supply and fit service

If your fire risk assessment in Thornaby-on-Tees has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in TS17 are free and quotes are fixed and itemised.

Thornaby-on-Tees is about 41 miles from York. Wherever your building is in TS17, we arrange survey and fitting dates around access and occupancy.

Fire door rules in Thornaby-on-Tees

Because Thornaby-on-Tees is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Cost of FD90 and FD120 fire doors in North Yorkshire

Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Thornaby-on-Tees quote is fixed after survey and itemised door by door.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where FD90 and FD120 fire doors are needed

Transformer and switch rooms and high fire-load stores are among the most common settings for FD90 and FD120 fire doors, in Thornaby-on-Tees as elsewhere.

North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.

  • Transformer and switch rooms
  • High fire-load stores
  • Generator rooms
  • Separating walls with long ratings

What you get with each doorset

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Your questions answered

Can you work around tenants or staff in Thornaby-on-Tees?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you cover Thornaby-on-Tees?

Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Thornaby-on-Tees and the rest of North Yorkshire, including TS17 and nearby Stockton-on-Tees.

How quickly can you survey in Thornaby-on-Tees?

We arrange surveys around your access needs and, where possible, combine Thornaby-on-Tees visits with other work in North Yorkshire. Tell us your preferred dates when you enquire.

Can FD120 doors have glass?

Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.

Also covering towns near Thornaby-on-Tees

Other fire doors in Thornaby-on-Tees

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.