FD60 Fire Doorsets for Billingham buildings
We fit FD60 doorsets for compartment walls, cores and plant rooms in Billingham and the rest of County Durham. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Whether your building is in central Billingham or on its edges towards Stockton-on-Tees, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Regulations for FD60 fire doors in County Durham
New and replacement fire doors in Billingham are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Billingham
Guide prices for FD60 fire doors in Billingham run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD60 fire doors are used in Billingham
Wherever they are in Billingham, FD60 fire doors are most often specified for higher-risk stores and compartment walls.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Higher-risk stores
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD60 fire doors in Billingham: questions
Is the survey in Billingham free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Billingham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Billingham.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Billingham
- Stockton-on-Tees (2 miles)
- Middlesbrough (2 miles)
- Thornaby-on-Tees (4 miles)
- Hartlepool (7 miles)
- Redcar (9 miles)
- Darlington (11 miles)
Other products in Billingham
- Riser & Service Cupboard Doors in Billingham
- FD30S Smoke Control Doorsets in Billingham
- Flat Entrance Fire Doors in Billingham
- FD30 Fire Doorsets in Billingham
- Fire-Rated Screens & Fanlights in Billingham
- Composite Fire Doors in Billingham
- Glazed Fire Doors in Billingham
- Security Fire Doors in Billingham
- FD60 Fire Doorsets across County Durham
- All fire doors in Billingham