Getting FD60 fire doors fitted in Norfolk
Across Norfolk we handle FD60 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.
What the law says in Norfolk
Because Norfolk is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Norfolk
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Norfolk quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are used in Norfolk
Norfolk centres on Norwich's city centre, offices and student housing, with Great Yarmouth's hotels and King's Lynn's industrial estates.
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Norfolk property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD60 fire doors in Norfolk
Which rules apply in Norfolk?
Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
Can you fit just one door?
Yes — from a single door to a full building.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Towns in Norfolk we cover for FD60 fire doors
FD60 Fire Doorsets in neighbouring areas
Other fire doors in Norfolk
- FD30 Fire Doorsets in Norfolk
- FD30S Smoke Control Doorsets in Norfolk
- FD90 & FD120 Doorsets in Norfolk
- Flat Entrance Fire Doors in Norfolk
- Communal & Corridor Fire Doors in Norfolk
- Stairwell & Escape Route Doors in Norfolk
- HMO Fire Doors in Norfolk
- Fire Doors for Homes in Norfolk
- Riser & Service Cupboard Doors in Norfolk
- Commercial & Office Fire Doors in Norfolk
- School & Healthcare Fire Doors in Norfolk
- Timber Fire Doorsets in Norfolk
- Composite Fire Doors in Norfolk
- Steel Fire Doors in Norfolk
- Glazed Fire Doors in Norfolk
- Double & Leaf-and-a-Half Fire Doors in Norfolk
- Fire-Rated Screens & Fanlights in Norfolk
- Acoustic Fire Doors in Norfolk
- Security Fire Doors in Norfolk
- Fire Exit Doors in Norfolk
- Fire Door Ironmongery & Closers in Norfolk
- Fire Door Replacement in Norfolk
- Fire Door Supply & Fit in Norfolk
- All fire doors in Norfolk