Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Lincolnshire

We supply and fit FD60 fire doors throughout Lincolnshire, including Lincoln, Grimsby and Scunthorpe, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in Lincolnshire, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 fire doors in Lincolnshire: how we work

Our Lincolnshire service covers FD60 fire doors for flats, HMOs, workplaces, schools and homes, including Lincoln, Grimsby and Scunthorpe.

Which rules apply in Lincolnshire?

Because Lincolnshire is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Cost of FD60 fire doors in Lincolnshire

Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Lincolnshire, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD60 fire doors are needed

Lincolnshire's demand spans Lincoln's student housing and city centre, Grimsby and Scunthorpe's industry, and coastal holiday accommodation.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

FD60 Fire Doorsets: key specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

  1. Tell us about the doors — photos help
  2. Free measure survey at your Lincolnshire property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Questions about FD60 fire doors in Lincolnshire

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can you fit just one door?

Yes — from a single door to a full building.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Towns in Lincolnshire we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in Lincolnshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.