Getting FD60 fire doors fitted in Cleethorpes
Need FD60 fire doors in Cleethorpes? We supply and fit complete certified doorsets across Lincolnshire, starting with a free measure survey in and around DN35. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Cleethorpes is about 31 miles from Lincoln. Wherever your building is in DN35, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Cleethorpes
In Cleethorpes, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Cleethorpes
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Cleethorpes, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD60 fire doors
Higher-risk stores and stair cores in taller blocks are among the most common settings for FD60 fire doors, in Cleethorpes as elsewhere.
Lincolnshire's demand spans Lincoln's student housing and city centre, Grimsby and Scunthorpe's industry, and coastal holiday accommodation.
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Cleethorpes
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Cleethorpes.
Is the survey in Cleethorpes free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Which rules do FD60 fire doors in Cleethorpes need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Grimsby (2 miles)
- Hull (18 miles)
- Beverley (25 miles)
- Scunthorpe (25 miles)
- Lincoln (31 miles)
- Skegness (32 miles)
Other products in Cleethorpes
- FD90 & FD120 Doorsets in Cleethorpes
- Security Fire Doors in Cleethorpes
- Double & Leaf-and-a-Half Fire Doors in Cleethorpes
- Timber Fire Doorsets in Cleethorpes
- Communal & Corridor Fire Doors in Cleethorpes
- Commercial & Office Fire Doors in Cleethorpes
- Fire Doors for Homes in Cleethorpes
- Composite Fire Doors in Cleethorpes
- FD60 Fire Doorsets across Lincolnshire
- All fire doors in Cleethorpes