Our Lincoln supply and fit service
Getting FD60 fire doors right in Lincoln means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Lincoln is one of the main towns we cover in Lincolnshire; tell us your dates and we'll arrange a survey.
Which rules apply in Lincoln?
Fire doors in Lincoln sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD60 fire doors in Lincolnshire
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Lincoln are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Lincoln
In Lincoln, FD60 fire doors are typically needed in stair cores in taller blocks and plant and boiler rooms.
Lincolnshire's demand spans Lincoln's student housing and city centre, Grimsby and Scunthorpe's industry, and coastal holiday accommodation.
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
- Compartment walls
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Lincoln
Which rules do FD60 fire doors in Lincoln need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Is the survey in Lincoln free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Lincoln?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Gainsborough (14 miles)
- Newark-on-Trent (16 miles)
- Retford (18 miles)
- Grantham (22 miles)
- Worksop (25 miles)
- Scunthorpe (25 miles)
Also available in Lincoln
- Stairwell & Escape Route Doors in Lincoln
- Double & Leaf-and-a-Half Fire Doors in Lincoln
- Fire Exit Doors in Lincoln
- Communal & Corridor Fire Doors in Lincoln
- Fire Door Ironmongery & Closers in Lincoln
- Composite Fire Doors in Lincoln
- Flat Entrance Fire Doors in Lincoln
- Acoustic Fire Doors in Lincoln
- FD60 Fire Doorsets across Lincolnshire
- All fire doors in Lincoln