Getting FD90 and FD120 fire doors fitted in Wimbledon
Getting FD90 and FD120 fire doors right in Wimbledon means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover SW19 and the surrounding area, including Morden. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Wimbledon
Fire doors in Wimbledon sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Greater London
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Wimbledon are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD90 and FD120 fire doors are used in Wimbledon
Typical uses for FD90 and FD120 fire doors in Wimbledon include high fire-load stores and generator rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- High fire-load stores
- Generator rooms
- Transformer and switch rooms
- Separating walls with long ratings
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD90 and FD120 fire doors in Wimbledon
Which rules do FD90 and FD120 fire doors in Wimbledon need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Wimbledon quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Wimbledon.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Also covering towns near Wimbledon
- Morden (2 miles)
- Mitcham (2 miles)
- Putney (2 miles)
- New Malden (2 miles)
- Streatham (3 miles)
- Barnes (4 miles)
Other fire doors in Wimbledon
- Fire Door Supply & Fit in Wimbledon
- FD30 Fire Doorsets in Wimbledon
- Security Fire Doors in Wimbledon
- Fire Doors for Homes in Wimbledon
- Fire-Rated Screens & Fanlights in Wimbledon
- HMO Fire Doors in Wimbledon
- Double & Leaf-and-a-Half Fire Doors in Wimbledon
- School & Healthcare Fire Doors in Wimbledon
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Wimbledon