FD30S Smoke Control Doorsets for Romford buildings
Need FD30S fire doors in Romford? We supply and fit complete certified doorsets across Greater London, starting with a free measure survey in and around RM1. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Where possible we combine Romford surveys with other visits in Greater London, such as Hornchurch and Dagenham, which helps keep survey dates flexible.
What the law says in Romford
In Romford, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD30S fire doors cost in Romford?
Our guide price for FD30S fire doors in Romford is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD30S fire doors
Wherever they are in Romford, FD30S fire doors are most often specified for protected stairways and cross-corridor doors.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Protected stairways
- Cross-corridor doors
- Lobby doors in blocks of flats
- Integral garage doors
What's in the doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Romford property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD30S fire doors in Romford: questions
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Romford.
Do you work for landlords and managing agents in Romford?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you fit just one door in Romford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Neighbouring areas
- Hornchurch (2 miles)
- Dagenham (2 miles)
- Becontree (3 miles)
- Ilford (5 miles)
- Barking (5 miles)
- Thamesmead (6 miles)
More doorsets for Romford
- Security Fire Doors in Romford
- Composite Fire Doors in Romford
- HMO Fire Doors in Romford
- Timber Fire Doorsets in Romford
- Commercial & Office Fire Doors in Romford
- Communal & Corridor Fire Doors in Romford
- Fire-Rated Screens & Fanlights in Romford
- FD30 Fire Doorsets in Romford
- FD30S Smoke Control Doorsets across Greater London
- All fire doors in Romford