Getting FD60 fire doors fitted in Stirling
We fit FD60 doorsets for compartment walls, cores and plant rooms in Stirling and the rest of Forth Valley. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Surveys in Stirling are booked around your access needs, and we cover the wider Forth Valley area too.
What the law says in Stirling
Scotland has its own system: new and replacement fire doors in Stirling are designed to the Building (Scotland) Regulations 2004 and the Technical Handbooks (Section 2, Fire). For non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on whoever controls the building.
Guide prices in Stirling
Our guide price for FD60 fire doors in Stirling is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD60 fire doors are needed
Wherever they are in Stirling, FD60 fire doors are most often specified for plant and boiler rooms and higher-risk stores.
Forth Valley combines Stirling's university and historic centre with Falkirk's industry and Alloa's town centre.
- Plant and boiler rooms
- Higher-risk stores
- Compartment walls
- Stair cores in taller blocks
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Forth Valley
What does a Stirling quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD60 fire doors in Stirling need to meet?
They are specified to the Scottish Building Standards Technical Handbooks and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Stirling.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
FD60 Fire Doorsets near Stirling
- Alloa (6 miles)
- Falkirk (10 miles)
- Cumbernauld (12 miles)
- Airdrie (17 miles)
- Coatbridge (18 miles)
- Bishopbriggs (18 miles)
More doorsets for Stirling
- FD30 Fire Doorsets in Stirling
- School & Healthcare Fire Doors in Stirling
- Fire-Rated Screens & Fanlights in Stirling
- Composite Fire Doors in Stirling
- Commercial & Office Fire Doors in Stirling
- HMO Fire Doors in Stirling
- Steel Fire Doors in Stirling
- Acoustic Fire Doors in Stirling
- FD60 Fire Doorsets across Forth Valley
- All fire doors in Stirling