Getting FD60 fire doors fitted in Carlisle
Getting FD60 fire doors right in Carlisle means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Carlisle is one of the main towns we cover in Cumbria; tell us your dates and we'll arrange a survey.
Regulations for FD60 fire doors in Cumbria
New and replacement fire doors in Carlisle are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD60 fire doors in Cumbria
Guide prices for FD60 fire doors in Carlisle run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Carlisle
In Carlisle, FD60 fire doors are typically needed in plant and boiler rooms and stair cores in taller blocks.
Cumbria has hotels and guest houses across the Lake District alongside town-centre flats and industrial sites in Carlisle and the west coast towns.
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
- Compartment walls
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Carlisle property
- Door-by-door schedule and fixed price
- Installation and handover pack
Your questions answered
Which rules do FD60 fire doors in Carlisle need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Is the survey in Carlisle free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you fit just one door in Carlisle?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Cumbria.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Also covering towns near Carlisle
- Dumfries (29 miles)
- Workington (30 miles)
- Whitehaven (35 miles)
- Hawick (37 miles)
- Kendal (40 miles)
- Consett (44 miles)
Other products in Carlisle
- Flat Entrance Fire Doors in Carlisle
- Fire Doors for Homes in Carlisle
- FD30 Fire Doorsets in Carlisle
- Fire Door Ironmongery & Closers in Carlisle
- School & Healthcare Fire Doors in Carlisle
- Timber Fire Doorsets in Carlisle
- FD90 & FD120 Doorsets in Carlisle
- Double & Leaf-and-a-Half Fire Doors in Carlisle
- FD60 Fire Doorsets across Cumbria
- All fire doors in Carlisle