FD60 Fire Doorsets for Macclesfield buildings
If your fire risk assessment in Macclesfield has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in SK11 are free and quotes are fixed and itemised.
Macclesfield is about 21 miles from Warrington; we cover both, along with Wilmslow, Congleton and Cheadle Hulme.
Fire door rules in Macclesfield
Fire doors in Macclesfield sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD60 fire doors cost in Macclesfield?
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Macclesfield quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD60 fire doors are used in Macclesfield
Typical uses for FD60 fire doors in Macclesfield include compartment walls and plant and boiler rooms.
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Cheshire
Is the survey in Macclesfield free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What does a Macclesfield quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you cover Macclesfield?
Yes. We survey, supply and fit FD60 fire doors throughout Macclesfield and the rest of Cheshire, including SK11 and nearby Wilmslow.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Macclesfield
- Wilmslow (6 miles)
- Congleton (7 miles)
- Cheadle Hulme (9 miles)
- Hazel Grove (9 miles)
- Buxton (9 miles)
- Stockport (11 miles)
More doorsets for Macclesfield
- Timber Fire Doorsets in Macclesfield
- School & Healthcare Fire Doors in Macclesfield
- Communal & Corridor Fire Doors in Macclesfield
- Security Fire Doors in Macclesfield
- Fire Door Ironmongery & Closers in Macclesfield
- Fire Door Replacement in Macclesfield
- Fire Exit Doors in Macclesfield
- FD30S Smoke Control Doorsets in Macclesfield
- FD60 Fire Doorsets across Cheshire
- All fire doors in Macclesfield