Certified FD60 fire doors for Buxton
Getting FD60 fire doors right in Buxton means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover SK17 and the surrounding area, including Macclesfield. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Buxton?
Fire doors in Buxton sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Buxton
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Buxton are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need FD60 fire doors
Typical uses for FD60 fire doors in Buxton include stair cores in taller blocks and higher-risk stores.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Buxton: questions
Can you work around tenants or staff in Buxton?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which rules do FD60 fire doors in Buxton need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Buxton quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
Nearby towns we cover
- Macclesfield (9 miles)
- Hazel Grove (12 miles)
- Congleton (14 miles)
- Wilmslow (14 miles)
- Cheadle Hulme (14 miles)
- Stockport (15 miles)
Other products in Buxton
- Fire Door Replacement in Buxton
- FD30 Fire Doorsets in Buxton
- FD30S Smoke Control Doorsets in Buxton
- Fire Door Ironmongery & Closers in Buxton
- Fire Door Supply & Fit in Buxton
- Commercial & Office Fire Doors in Buxton
- Steel Fire Doors in Buxton
- Communal & Corridor Fire Doors in Buxton
- FD60 Fire Doorsets across Derbyshire
- All fire doors in Buxton