Getting FD60 fire doors fitted in Wilmslow
If your fire risk assessment in Wilmslow has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in SK9 are free and quotes are fixed and itemised.
We cover SK9 and the surrounding area, including Cheadle Hulme. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD60 fire doors in Cheshire
New and replacement fire doors in Wilmslow are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD60 fire doors in Cheshire
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Wilmslow are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD60 fire doors are used in Wilmslow
Typical uses for FD60 fire doors in Wilmslow include higher-risk stores and plant and boiler rooms.
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
- Stair cores in taller blocks
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Can you work around tenants or staff in Wilmslow?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Wilmslow quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Wilmslow.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
FD60 Fire Doorsets near Wilmslow
- Cheadle Hulme (4 miles)
- Hazel Grove (6 miles)
- Altrincham (6 miles)
- Macclesfield (6 miles)
- Stockport (6 miles)
- Sale (7 miles)
More doorsets for Wilmslow
- Fire Doors for Homes in Wilmslow
- Fire Exit Doors in Wilmslow
- Steel Fire Doors in Wilmslow
- Fire Door Replacement in Wilmslow
- HMO Fire Doors in Wilmslow
- Communal & Corridor Fire Doors in Wilmslow
- Security Fire Doors in Wilmslow
- Fire Door Ironmongery & Closers in Wilmslow
- FD60 Fire Doorsets across Cheshire
- All fire doors in Wilmslow