FD60 fire doors in Stockport: how we work
We fit FD60 doorsets for compartment walls, cores and plant rooms in Stockport and the rest of Greater Manchester. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Stockport is about 6 miles from Manchester; we cover both, along with Hazel Grove, Cheadle Hulme and Denton.
Regulations for FD60 fire doors in Greater Manchester
New and replacement fire doors in Stockport are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD60 fire doors prices in Stockport
Guide prices for FD60 fire doors in Stockport run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are needed
Typical uses for FD60 fire doors in Stockport include plant and boiler rooms and compartment walls.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD60 fire doors in Stockport
Do you cover Stockport?
Yes. We survey, supply and fit FD60 fire doors throughout Stockport and the rest of Greater Manchester, including SK1 and nearby Hazel Grove.
Which rules do FD60 fire doors in Stockport need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Is the survey in Stockport free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Neighbouring areas
- Hazel Grove (2 miles)
- Cheadle Hulme (2 miles)
- Denton (4 miles)
- Hyde (4 miles)
- Droylsden (5 miles)
- Dukinfield (6 miles)
Also available in Stockport
- Steel Fire Doors in Stockport
- HMO Fire Doors in Stockport
- Fire Door Supply & Fit in Stockport
- Composite Fire Doors in Stockport
- FD30S Smoke Control Doorsets in Stockport
- FD30 Fire Doorsets in Stockport
- Riser & Service Cupboard Doors in Stockport
- Commercial & Office Fire Doors in Stockport
- FD60 Fire Doorsets across Greater Manchester
- All fire doors in Stockport