Our Wellington supply and fit service
For landlords, managing agents, businesses and homeowners in Wellington, we provide FD30S smoke control doorsets for flats, stairs and corridors with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
We cover TF1 and the surrounding area, including Telford. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Wellington
New and replacement fire doors in Wellington are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD30S fire doors cost in Wellington?
Our guide price for FD30S fire doors in Wellington is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Wellington
In Wellington, FD30S fire doors are typically needed in protected stairways and lobby doors in blocks of flats.
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Protected stairways
- Lobby doors in blocks of flats
- Cross-corridor doors
- Integral garage doors
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Shropshire
Can you work around tenants or staff in Wellington?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Wellington free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Wellington?
Yes. We survey, supply and fit FD30S fire doors throughout Wellington and the rest of Shropshire, including TF1 and nearby Telford.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
Neighbouring areas
- Telford (3 miles)
- Shrewsbury (10 miles)
- Stafford (18 miles)
- Wolverhampton (18 miles)
- Wednesfield (19 miles)
- Kingswinford (20 miles)
Other products in Wellington
- Fire-Rated Screens & Fanlights in Wellington
- Steel Fire Doors in Wellington
- Fire Doors for Homes in Wellington
- Security Fire Doors in Wellington
- FD90 & FD120 Doorsets in Wellington
- Fire Exit Doors in Wellington
- Fire Door Ironmongery & Closers in Wellington
- FD60 Fire Doorsets in Wellington
- FD30S Smoke Control Doorsets across Shropshire
- All fire doors in Wellington