Certified FD30S fire doors for Shrewsbury
Looking for FD30S fire doors in Shrewsbury? Our supply and fit service covers SY1 and the surrounding area, including Wellington and Telford. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Where possible we combine Shrewsbury surveys with other visits in Shropshire, such as Wellington and Telford, which helps keep survey dates flexible.
What the law says in Shrewsbury
Fire doors in Shrewsbury sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD30S fire doors cost in Shrewsbury?
Guide prices for FD30S fire doors in Shrewsbury run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30S fire doors are used in Shrewsbury
Typical uses for FD30S fire doors in Shrewsbury include lobby doors in blocks of flats and cross-corridor doors.
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Lobby doors in blocks of flats
- Cross-corridor doors
- Integral garage doors
- Protected stairways
What you get with each doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD30S fire doors in Shrewsbury
Is the survey in Shrewsbury free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Shrewsbury.
Which rules do FD30S fire doors in Shrewsbury need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Which doors in a block of flats need FD30S?
Typically flat entrance doors and doors onto protected stairs and lobbies. The building's fire strategy is the final word.
FD30S Smoke Control Doorsets near Shrewsbury
- Wellington (10 miles)
- Telford (13 miles)
- Rhosllannerchrugog (24 miles)
- Wrexham (25 miles)
- Newtown (27 miles)
- Stafford (27 miles)
Other products in Shrewsbury
- Acoustic Fire Doors in Shrewsbury
- Security Fire Doors in Shrewsbury
- School & Healthcare Fire Doors in Shrewsbury
- FD60 Fire Doorsets in Shrewsbury
- Timber Fire Doorsets in Shrewsbury
- HMO Fire Doors in Shrewsbury
- Fire Exit Doors in Shrewsbury
- FD30 Fire Doorsets in Shrewsbury
- FD30S Smoke Control Doorsets across Shropshire
- All fire doors in Shrewsbury