FD30S Smoke Control Doorsets for Telford buildings
If your fire risk assessment in Telford has flagged doors to replace, we can schedule, quote and fit FD30S smoke control doorsets for flats, stairs and corridors to match its recommendations. Surveys in TF4 are free and quotes are fixed and itemised.
We cover Telford and the rest of Shropshire, with surveys arranged around your building's access and occupancy.
Fire door rules in Telford
Fire doors in Telford sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD30S fire doors cost in Telford?
Budget around £800 to £1,250 per single doorset for FD30S fire doors supplied and fitted in Telford, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Telford
In Telford, FD30S fire doors are typically needed in lobby doors in blocks of flats and integral garage doors.
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Lobby doors in blocks of flats
- Integral garage doors
- Protected stairways
- Cross-corridor doors
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD30S fire doors in Telford
Can you fit just one door in Telford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Shropshire.
Is the survey in Telford free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Which rules do FD30S fire doors in Telford need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What is the difference between FD30 and FD30S?
Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.
FD30S Smoke Control Doorsets near Telford
- Wellington (3 miles)
- Shrewsbury (13 miles)
- Wolverhampton (15 miles)
- Wednesfield (16 miles)
- Stafford (17 miles)
- Kingswinford (17 miles)
More doorsets for Telford
- HMO Fire Doors in Telford
- Acoustic Fire Doors in Telford
- Fire-Rated Screens & Fanlights in Telford
- Glazed Fire Doors in Telford
- Fire Exit Doors in Telford
- Fire Doors for Homes in Telford
- Fire Door Supply & Fit in Telford
- Composite Fire Doors in Telford
- FD30S Smoke Control Doorsets across Shropshire
- All fire doors in Telford