Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SPairsHold-open

Communal & Corridor Fire Doors in Catford

We supply and fit communal fire doors in Catford (SE6) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £1,600 per pair in Catford, supplied & fitted, ex VAT

Pair of white timber cross-corridor fire doors with vision panels and hold-open devices

Communal fire doors in Catford: how we work

If your fire risk assessment in Catford has flagged doors to replace, we can schedule, quote and fit communal corridor and lobby fire doors to match its recommendations. Surveys in SE6 are free and quotes are fixed and itemised.

We cover SE6 and the surrounding area, including Blackheath. Tell us your postcode and preferred dates and we'll confirm a survey slot.

Which rules apply in Catford?

In Catford, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Communal fire doors prices in Catford

Guide prices for communal fire doors in Catford run from about £1,600 to £3,200 per pair, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Typical uses in Catford

Typical uses for communal fire doors in Catford include student accommodation and hotels.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

  • Student accommodation
  • Hotels
  • Blocks of flats
  • Sheltered and supported housing

Communal & Corridor Fire Doors: key specification

RatingFD30S typical; FD60S in some lobbies
ConfigurationSingles, pairs and leaf-and-a-half
GlazingVision panels sized to the doorset's evidence
Hold-openAlarm-linked magnetic hold-open or free-swing closers (BS EN 1155)
AccessibilityOpening forces and vision panels to accessibility guidance (Approved Document M in England)
Elevation drawing of communal & corridor fire doors

See the full specification and options for Communal & Corridor Fire Doors

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Communal fire doors in Catford: questions

Can you work around tenants or staff in Catford?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Catford.

Will I get certificates for the doors fitted in Catford?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do you replace doors while the building is occupied?

Yes. We phase work so escape routes are maintained, and plan each door to be removed and replaced the same day. If that isn't possible, the opening is made secure and we tell you in advance.

Also covering towns near Catford

Other products in Catford

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.