FD30S fire doors in Billingham: how we work
We fit FD30S smoke control doorsets for flats, stairs and corridors in Billingham and the rest of County Durham. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Our County Durham coverage includes Billingham and its neighbours Stockton-on-Tees, Middlesbrough and Thornaby-on-Tees; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Billingham?
Fire doors in Billingham sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD30S fire doors cost in Billingham?
Guide prices for FD30S fire doors in Billingham run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30S fire doors are used in Billingham
Typical uses for FD30S fire doors in Billingham include protected stairways and lobby doors in blocks of flats.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Protected stairways
- Lobby doors in blocks of flats
- Integral garage doors
- Cross-corridor doors
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Billingham property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD30S fire doors in Billingham: questions
Can you work around tenants or staff in Billingham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you cover Billingham?
Yes. We survey, supply and fit FD30S fire doors throughout Billingham and the rest of County Durham, including TS23 and nearby Stockton-on-Tees.
Will I get certificates for the doors fitted in Billingham?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Also covering towns near Billingham
- Stockton-on-Tees (2 miles)
- Middlesbrough (2 miles)
- Thornaby-on-Tees (4 miles)
- Hartlepool (7 miles)
- Redcar (9 miles)
- Darlington (11 miles)
Other products in Billingham
- HMO Fire Doors in Billingham
- FD60 Fire Doorsets in Billingham
- Acoustic Fire Doors in Billingham
- School & Healthcare Fire Doors in Billingham
- Security Fire Doors in Billingham
- Timber Fire Doorsets in Billingham
- Fire Door Replacement in Billingham
- Fire Exit Doors in Billingham
- FD30S Smoke Control Doorsets across County Durham
- All fire doors in Billingham