Certified FD30S fire doors for Consett
Looking for FD30S fire doors in Consett? Our supply and fit service covers DH8 and the surrounding area, including Stanley and Newburn. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Our County Durham coverage includes Consett and its neighbours Stanley, Newburn and Chester-le-Street; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Consett
In Consett, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD30S fire doors cost in Consett?
Guide prices for FD30S fire doors in Consett run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need FD30S fire doors
Typical uses for FD30S fire doors in Consett include protected stairways and integral garage doors.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Protected stairways
- Integral garage doors
- Cross-corridor doors
- Lobby doors in blocks of flats
What's in the doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
How it works in Consett
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in County Durham
Will I get certificates for the doors fitted in Consett?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Consett.
Do you work for landlords and managing agents in Consett?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Nearby towns we cover
- Stanley (6 miles)
- Newburn (10 miles)
- Chester-le-Street (10 miles)
- Durham (12 miles)
- Gateshead (12 miles)
- Newcastle upon Tyne (12 miles)
Also available in Consett
- Glazed Fire Doors in Consett
- Acoustic Fire Doors in Consett
- HMO Fire Doors in Consett
- Riser & Service Cupboard Doors in Consett
- Double & Leaf-and-a-Half Fire Doors in Consett
- Steel Fire Doors in Consett
- Flat Entrance Fire Doors in Consett
- Security Fire Doors in Consett
- FD30S Smoke Control Doorsets across County Durham
- All fire doors in Consett