Certified FD30S fire doors for Stanley
Fire Rated Doors supplies and fits FD30S fire doors in Stanley, County Durham. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Stanley is about 24 miles from Darlington; we cover both, along with Chester-le-Street, Consett and Gateshead.
Fire door rules in Stanley
New and replacement fire doors in Stanley are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD30S fire doors cost in Stanley?
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Stanley are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need FD30S fire doors
Integral garage doors and cross-corridor doors are among the most common settings for FD30S fire doors, in Stanley as elsewhere.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Integral garage doors
- Cross-corridor doors
- Protected stairways
- Lobby doors in blocks of flats
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Can you fit just one door in Stanley?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in County Durham.
What does a Stanley quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Stanley?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which doors in a block of flats need FD30S?
Typically flat entrance doors and doors onto protected stairs and lobbies. The building's fire strategy is the final word.
Neighbouring areas
- Chester-le-Street (5 miles)
- Consett (6 miles)
- Gateshead (7 miles)
- Washington (7 miles)
- Felling (7 miles)
- Durham (8 miles)
Other fire doors in Stanley
- HMO Fire Doors in Stanley
- Communal & Corridor Fire Doors in Stanley
- Riser & Service Cupboard Doors in Stanley
- School & Healthcare Fire Doors in Stanley
- Fire Door Replacement in Stanley
- Flat Entrance Fire Doors in Stanley
- Fire-Rated Screens & Fanlights in Stanley
- Security Fire Doors in Stanley
- FD30S Smoke Control Doorsets across County Durham
- All fire doors in Stanley