Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30E30 / EI3044mm leaf

FD30 Fire Doorsets in Perth & Kinross

We supply and fit FD30 fire doors throughout Perth & Kinross, including Perth, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £750 per single doorset in Perth & Kinross, supplied & fitted, ex VAT

White painted flush timber fire door with overhead closer in an office corridor

Getting FD30 fire doors fitted in Perth & Kinross

Our Perth & Kinross service covers FD30 fire doors for flats, HMOs, workplaces, schools and homes, including Perth.

Which rules apply in Perth & Kinross?

In Perth & Kinross the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.

FD30 fire doors prices in Perth & Kinross

Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Perth & Kinross quote is fixed after survey and itemised door by door.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where FD30 fire doors are used in Perth & Kinross

Perth and Kinross mixes Perth's city centre and offices with rural hotels, schools and care homes.

  • Offices and retail back-of-house
  • HMO bedrooms and kitchens
  • Hotel corridors
  • Plant rooms and stores

FD30 Fire Doorsets: key specification

Fire resistance30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf44mm timber, flush or with vision panel
Test evidenceBS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
CloserOverhead closer to BS EN 1154 (except locked cupboards)
HingesThree CE/UKCA-marked hinges to BS EN 1935, grade 13 typical
Elevation drawing of fd30 fire doorsets

See the full specification and options for FD30 Fire Doorsets

From enquiry to handover

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in Perth & Kinross

Can you fit just one door?

Yes — from a single door to a full building.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you cover the whole of Perth & Kinross?

Yes. We survey, supply and fit FD30 fire doors across Perth & Kinross, including Perth.

Can I fit an FD30 door into my existing frame?

Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.

Towns in Perth & Kinross we cover for FD30 fire doors

FD30 Fire Doorsets in neighbouring areas

Other fire doors in Perth & Kinross

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.