Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Perth & Kinross

We supply and fit FD60 fire doors throughout Perth & Kinross, including Perth, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in Perth & Kinross, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 Fire Doorsets for Perth & Kinross buildings

We supply and fit FD60 fire doors across Perth & Kinross, including Perth. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

What the law says in Perth & Kinross

In Perth & Kinross the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.

What do FD60 fire doors cost in Perth & Kinross?

Guide prices for FD60 fire doors in Perth & Kinross run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Buildings that need FD60 fire doors

Perth and Kinross mixes Perth's city centre and offices with rural hotels, schools and care homes.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

What's in the doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

FD60 fire doors in Perth & Kinross: questions

Which rules apply in Perth & Kinross?

Doors are specified to the Scottish Building Standards Technical Handbooks and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Can you fit just one door?

Yes — from a single door to a full building.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Towns in Perth & Kinross we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in Perth & Kinross

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.