Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SPAS 24 optionSelf-closing

Flat Entrance Fire Doors in Perth & Kinross

We supply and fit flat entrance fire doors throughout Perth & Kinross, including Perth, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,250 per door in Perth & Kinross, supplied & fitted, ex VAT

Anthracite grey flat entrance door with spyhole in a residential corridor

Flat Entrance Fire Doors for Perth & Kinross buildings

Across Perth & Kinross we handle flat entrance fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.

Which rules apply in Perth & Kinross?

Fire doors in Perth & Kinross follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.

Guide prices in Perth & Kinross

Our guide price for flat entrance fire doors in Perth & Kinross is £1,250 to £2,300 per door including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Buildings that need flat entrance fire doors

Perth and Kinross mixes Perth's city centre and offices with rural hotels, schools and care homes.

  • Blocks of flats
  • Converted buildings with shared stairs
  • Student and build-to-rent blocks
  • Supported housing

Flat Entrance Fire Doors: key specification

Fire & smokeFD30S / E30 Sa as standard
SecurityPAS 24:2022 options; Approved Document Q requires PAS 24 or equivalent for new dwellings in England
HardwareSelf-closer, multipoint or nightlatch, fire-rated spyhole and letterplate where tested
MaterialsTimber, composite or steel-faced
AcousticAcoustic-rated options for noisy corridors
Elevation drawing of flat entrance fire doors

See the full specification and options for Flat Entrance Fire Doors

What happens next

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Common questions in Perth & Kinross

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do you cover the whole of Perth & Kinross?

Yes. We survey, supply and fit flat entrance fire doors across Perth & Kinross, including Perth.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can I fit my own new front door to my flat?

Only with a doorset that meets the building's fire and smoke requirements, and usually with the freeholder's consent. A non-compliant replacement can put the whole building at risk.

Towns in Perth & Kinross we cover for flat entrance fire doors

Flat Entrance Fire Doors in neighbouring areas

Other fire doors in Perth & Kinross

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.